• Typical dry matter: 65% (35% moisture)
  • Well-packed bunker target: 14 lb DM/ft³ (UNL / Wisconsin / Cornell)
  • Wet density at that pack and typical dry matter: 21.5 lb/ft³
  • Typical grain share of dry matter: about 75%

Iowa State bunker density by depth

C6-82 estimates dry-matter density from the depth of the pack. For corn silage (used here as the stand-in for snaplage unless you have a measured density):

DepthISU DM densityWet density at 65% DMWet tons per 1,000 ft³
8 ft10.7 lb/ft³16.5 lb/ft³8.2 t
10 ft11.5 lb/ft³17.7 lb/ft³8.8 t
12 ft12.3 lb/ft³18.9 lb/ft³9.5 t
14 ft13.1 lb/ft³20.2 lb/ft³10.1 t
16 ft13.9 lb/ft³21.4 lb/ft³10.7 t
Wet tons per 1,000 ft³ = wet density ÷ 2. Compare with 20.0 tons at the 14 lb DM / 65% DM UNL default.

Run the tonnage calculator

Storage

If the pack is crowned, use the average depth, not the peak.

Dry-matter density

Silage in storage

193.8 wet tons

Dry-matter tons126.0 t
Volume18,000 ft³
Dry-matter density14.0 lb/ft³
Wet density at 65% DM21.5 lb/ft³
Wet weight387,692 lb