Oxygen left in a loosely packed bunker is what spoils silage. Density sets how porous the pack is, and therefore how much dry matter you lose in storage and at feedout. That is why extension writers talk about 14 or 15 lb of dry matter per cubic foot as a target, not just “pack it well.”

What changes density

Holmes and Muck at the University of Wisconsin surveyed more than 160 bunkers and found that heavier tractors, more packing time, thinner layers and drier forage (within the 30–40% dry matter window) all raised density. Delivery rate worked the other way: fast filling with a self-propelled chopper often meant less than a minute of packing per ton.

Their worked example starts at 10.5 lb DM/ft³ with two tractors, 12-inch layers and 100 tons per hour. Cutting layers to 6 inches reached 12.6 lb. Adding 6,000 lb to each tractor got close to 14 lb. The packing calculator uses that 1999 equation.

What a light pack costs

Ruppel (Cornell, 1992), as cited by Holmes and Muck, estimated 180-day dry-matter loss at 20.2% when density was 10 lb/ft³, 16.8% at 14 lb, and 10% at 22 lb. Raising a pack from 14 to 16 lb saved about 1.7 percentage points of dry matter.

Covering the bunker still matters. MU G4591 Table 5 puts a covered bunker at roughly 16–23% total loss at 70% moisture, and an uncovered bunker several points higher, even before you count a poor pack.